Filter
Top Products
s 2100 kg/m
3
(3,500 lb/yd
3
) max material density
n 1800 kg/m
3
(3,000 lb/yd
3
) max material density
* 1500 kg/m
3
(2,500 lb/yd
3
) max material density
∴ 1200 kg/m
3
(2,000 lb/yd
3
) max material density
Assumptions for maximum material density rating:
1. Front linkage fully extended at ground line
2. Bucket curled
3. 100% bucket fill factor
*
Based on SAE J296, some calculations of capacity specs fall on borderlines. Rounding
may allow two buckets to have the same English rating, but different metric ratings.
Bucket Specifications and Compatibility
Bucket Type Adaptor Capacity* Width Tip Teeth Total Reach Boom Mass
Radius Weight Stick Boom
Stick
m
3
yd
3
mm in mm in Qty kg lb R3.75CB2 R3.2CB2 R2.65CB2 M3.2CB2
CB Family Buckets
General Purpose K90 0.63 0.82 610 24 1656.3 65.2 3 729 1,606 sss s
K90 0.86 1.12 762 30 1656.3 65.2 4 847 1,868 sss s
K90 1.09 1.43 914 36 1656.3 65.2 5 951 2,097 sss s
K90 1.34 1.75 1067 42 1656.3 65.2 5 1024 2,258 sss s
K90 1.58 2.07 1219 48 1656.3 65.2 6 1121 2,471 nss s
K90 1.83 2.39 1372 54 1656.3 65.2 7 1218 2,684 *nn n
Heavy Duty K100 0.53 0.69 610 24 1686.3 66.4 3 780 1,720 sss s
K100 0.73 0.95 762 30 1686.3 66.4 3 858 1,891 sss s
K100 0.93 1.22 914 36 1686.3 66.4 4 982 2,165 sss s
K100 1.14 1.49 1067 42 1686.3 66.4 5 1073 2,365 sss s
K100 1.35 1.77 1219 48 1686.3 66.4 5 1143 2,519 sss s
K100 1.57 2.05 1372 54 1686.3 66.4 6 1238 2,730 nss s
K100 1.78 2.33 1524 60 1686.3 66.4 7 1334 2,941 *nn n
K100 1.99 2.60 1676 66 1686.3 66.4 7 1406 3,101 ∴ ** n
Heavy Duty Rock K100 0.73 0.95 762 30 1686.3 66.4 3 965 2,127 sss s
K100 0.93 1.22 914 36 1686.3 66.4 4 1073 2,365 sss s
K100 1.14 1.49 1067 42 1686.3 66.4 5 1174 2,588 sss s
K100 1.35 1.77 1219 48 1686.3 66.4 5 1259 2,775 sss s
Heavy Duty Power K100 1.12 1.46 1067 42 1592.1 62.7 5 1060 2,337 sss s
K100 1.33 1.74 1219 48 1592.1 62.7 5 1137 2,507 sss s
K100 1.53 2.00 1372 54 1592.1 62.7 6 1237 2,727 nss s
Ditch Cleaning N/A 1.25 1.63 1524 60 1262.0 49.7 — 739 1,629 sss s
N/A 1.53 2.00 1830 72 1262.0 49.7 — 837 1,845 sss s
20
325D L Hydraulic Excavator specifications