Filter
Top Products
8
Attach the fan remote wires to the ceiling
bracket wiring by placing the bare end of the wires
side by side and then securing with a wire nut. Test
that the connection is secure by pulling on the wire
nut. Connect in this order:
• GREEN leads from ceiling bracket and motor to
GROUND conductor of power source. Secure with
wire nut as shown in Figure #4.
• WHITE wire from receiver to the WHITE NEUTRAL
conductor wire from the power source. Secure with
wire nut as shown in Figure #4.
• BLACK wire from receiver to the BLACK conductor
wire from the power source. Secure with wire nut
as shown in Figure #4.
After making the wire connections, the wires
should be tucked in to the body of the fan as shown
in Figure #5. The wires should be spread apart, with
the three grounded conductor wires being placed on
one side of the fan body and the power conductor
wires being placed onto the other side of the fan body
separating the connections.
Install 2 fan mounting screws on the left side
of each side of the mounting plate #6.