12
OUTSIDE USA - SECONDARY SUPPORT ♦ CANOPY INSTALLATION
Step 12. Attach the canopy to the crossbar mounting bracket behind
the installed outlet adaptor plate with three of the 8-32 x 2
1
⁄
2
" long
canopy screws and lock washers provided with your Casablanca fan.
Hand tighten until snug against the ceiling.
OUTSIDE USA - SECONDARY SUPPORT ♦ HANGING THE FAN
Step 14. To hang the fan body in the canopy, hold
the fan body firmly and insert the nylon ball into the
canopy opening. Rotate fan body until slot on nylon
ball fits into pin opposite canopy opening.
Step 15. Attach the fan wires to the ceiling outlet
box wiring by twisting the bare ends of the wiring
together:
FAN
CABLE
CANOPY
OUTLET
BOX
CABLE
SPRING
LOCK
CANOPY
SCREW
CANOPY
LOCK
WASHER
FEED OUTLET BOX
CABLE AND OUTLET
BOX WIRES
THROUGH CANOPY
OPENING
FAN
CABLE
SPRING
LOCK HOOK
BALL
SLOT
PIN
• White wire from fan to white NEUTRAL wire in ceiling
outlet box.
• Black wire and blue wire from fan to black (or red)
POWER wire in ceiling outlet box.
• Green leads from crossbar mounting bracket and
fan to grounding conductor of power source.
Secure by threading on the wire nuts provided with
the fan.
FOUR SEASONS™ III (OUTSIDE USA INSTALLATION)
NOTE: On sloped ceilings, align the canopy opening
toward the top or peak of the room.
Step 13. Attach the spring lock hook to the fan cable by depressing
the spring lock and clipping onto the loop at the end.
NOTE: SEE PAGE 12 FOR ADDITIONAL WIRING
INSTRUCTIONS.