Filter
Top Products
7
Step 11. Install the assembled blade and
blade holder to the fan motor. Use the blade
holder screws provided.
Using the screwdriver, tighten securely by
hand only.
Step 10. On the motor remove the five
shipping blocks by unscrewing the screws.
Discard the five shipping blocks and
screws.
SHIPPING
BLOCKS
WAILEA
TM
REMOVE SHIPPING BLOCKS
BLADE/BLADE HOLDER INSTALLATION
BLADE HOLDER SCREWS
(2 PER BLADE HOLDER)
Step 12. Remove the two screws of the
switch housing cap. Set the cap and screws
aside for use in Step 17.
REMOVE SWITCH HOUSING CAP SCREWS