Filter
Top Products
Error Messages 3-3
Error Message Chart
Perform the required remedies according to the error indicated on the host machine (printer).
*1
If this error message appears when the conveyor is not full, trim may exists at the sensor.
Cause of Error Remedy
The delivery section cover is open. Close the delivery section cover .
The front cover is open. Close the front cover .
The trim unit is not inserted correctly. Hold the handle
C2 and insert the trim unit to the rear
end correctly.
The trimmer booklet waste tray is not
ins
erted c
orrectly.
Insert the trimmer booklet waste tray to the rear end
correctly.
The conveyor is full.
*1
Lift the E handle and remove the booklets from the con-
veyor.
The trimmer booklet waste tray is full. Open the front cover , pull out the trimmer booklet
waste tray , and empty it. Reposition the trimmer book-
let waste tray and close the front cover .
A booklet jam has occurred in
D sec-
tion.
Open the front cover and remove the jammed booklet
from the space on the trim unit. Then close the front cover
to restart the printing.
A booklet jam has occurred in C sec-
tion.
Open the front cover and turn the
C1 manual han-
dle clockwise to transport the jammed booklet to the trim
unit c
ompletely, then hold the
C2 handle to pull out the
trim unit. Open the
C3 and C4 transport belt unit,
and remove the jammed booklet. Reposition the
C3
and C4
transport belt unit and hold the C2 handle to
reposition
the trim unit. Then close the front cover to
restart the printing.
A booklet jam has occurred in B sec-
tion.
Open the front cover and the
B transport belt unit.
Remove the jammed booklet, reposition the
B transport
belt unit and the front cover to restart the printing.
A booklet jam has occurred in
A sec-
tion.
Lift the E handle and remove the jammed booklet com-
pletely. Open the delivery section cover and the
A
transport belt unit. Remove the jammed booklet, close the
A transport belt unit and the delivery section cover
to restart the printing.
Booklet waste exists at delivery section.
B
2
1
3
C1
C2
E
A
C3
D
C4
When removing jammed booklets
from the trim section, take care not
to touch the blade edge.
CAUTION
2
1
3
1
3
3
1
1
1
1
1
1
1
2
2