Filter
Top Products
Operation While Trimming 2-3
Operation While Trimming
When the conveyor is full with booklets, remove the booklets.
If the machine stops because the conveyor is full, remove the booklets, and the operation
restarts automatically.
· If you remove booklets before the conveyor is full, you can increase production
e
f
ficiency, without interrupting the operation.
· Be careful not to drop the book while removing.
When the trimmer booklet waste tray is full, open the front cover, pull
out the trimmer booklet waste
tray, and empty it.
If trim drops off inside the machine when this tray is pulled out, make sure to remove the
dropped trim.
To reposition the trimmer booklet waste tray, insert until it reaches to the rear end.
Close the front cover, and the operation restarts automatically.
Delivery Tray
Trimmer Booklet Waste Tray