Filter
Top Products
3. Secure garden hose (not included) to the inlet connection
on pump.
4. Connect the high pressure hose to the pump outlet (See
Figures 2 and 5).
Figure 5 – Connect high pressure hose
to pump
5. Attach the lance to the gun (see Figure 6).
Figure 6 – Attach lance to gun
6. Install quick connect tip by pulling back on collar and
pressing in tip. Release collar, make sure it completely
returns to its forward position and tip is secure (see Figure
7).
Figure 7 – Installing quick connect tip
Pull collar back
7. Install quick connect tips to tip holder and secure to the
pressure washer handle. See Figure 8.
Figure 8 – Insert spray tips into the rubber tip holder
TRIGGER SAFETY LATCH
In the engaged position, the trigger safety latch prevents the
gun from being triggered accidentally. Push the latch fully up
to engage it (See Figure 9).
Always engage the trigger safety latch when the unit is not in
use.
6
Pressure Washer
www.chpower.com
Figure 9a - Trigger locked
Engaged
Figure 9b - Trigger unlocked
Disengaged
Pre-Operation