Cal Spas 6300 Hot Tub User Manual


 
Page 20 2008 Portable Spa Owner’s Manual
LTR20081000, Rev. B
Water Quality Maintenance
Water Quality Maintenance
Cal Spas Clear Water Plan
Great spa water is easily achieved when the right
chemicals and / or systems are used and the Cal Spas
Clear Water Plan is implemented. The key to clean,
clear, and safe water is to fully understand how spa water
reacts to users, system operation and chemical use. The
Clear Water Plan will help give you that understanding.
The rst thing to understand about taking care of your
spa water is that preventive actions are much easier to
do than correcting water quality issues. For this reason,
we offer the Clear Water Plan as a simple, easy to follow
guide to clean, safe spa water.
Follow the Right Plan
You will need to decide which chemical plan or alternative
sanitation option works best for your spa water. Consult
your Cal Spas dealer for the right decision with regards
to your lifestyle and spa usage. Whichever plan you
decide on, follow it completely and don’t take shortcuts.
These plans will provide you with clean, safe, clear spa
water with a minimum of effort.
Traditional Chemical Options
Choose from either Bromine tablets or Chlorinating
granules as your sanitizer of choice. Both work well when
the appropriate Clear Water Plan is followed. Make sure
you follow all instructions and use only Cal Spas brand
chemicals.
Alternative Sanitation Options
Cal Zone Quest 2000 / 3000 Ozonator
This system automatically generates ozone gas and
injects it into the spa water. Ozone gas is far superior
to chemical bromine or chlorine in sanitizing spa water.
Saves replacement chemical cost and guards against
forgetting to add chemicals.
Cal Clarity Automatic Bromine Generator
This system automatically generates and releases
free bromine into the spa water. No more need to add
chemical bromine tablets or chlorine granules. Saves
replacement chemical cost and circumvents the need to
add chemicals on a regular basis.
Before You Begin
Before you begin a Clear Water Plan, you should
understand that chemicals or systems alone will not take
care of your spa water. Other factors such as Filtration
and Bather Load also play an important part.
Filtration
The lter is the part of your spa that removes the debris
from the water. Even though Cal Spas uses the advanced
Bio Clean lter cartridge that protects itself from bacterial
growth, the lter still needs to be cleaned on a regular
basis to maximize your spa’s ltering performance and
heating efciency.
In addition to spraying off the lter weekly to remove
surface debris, your lter should be deep cleaned
periodically to dissolve scale and other contaminants
that get lodged deep within the lter bers and impede
the ltration process. Even if the lter looks clean, the
contaminants can clog the bers and prevent water from
owing through the lter resulting in the most common
spa problem—no heat, caused by a dirty lter.
Filter Cleaning
Place the dirty lter into a bucket of water deep
enough to cover the lter. Add 8 oz of Cal Spas
“Liquid Filter Cleaner” to the bucket of water.
Note: It is a good idea to keep a spare lter to be deep
cleaned while the regular lter is in the spa. This way,
you can rotate the lters and both will last longer.
Soak the lter for a minimum of 24 hours.
Remove the lter and spray clean with a water hose.
Spray each pleat carefully.
Allow lter to dry completely (a minimum of 2 days
drying time is recommended).
Reinstall lter as described in the Clear Water Plan.
Filtration Cycles
The ltration cycle of your spa is the process that allows
the water to ow through the lter. Your spa will lter
automatically twice each day. The factory set default time
for ltration is usually enough for normal use, however
heavy bather load or frequent use may require longer
ltration times or more frequent ltration cycles to keep
the spa water clean. Consult your Owner’s Manual for
setting your spa’s ltration times.