Filter
Top Products
2009 Villa
LTR20091034, Rev. A
Assembly
www .calspas.com
3
The nal placement of the main support posts is shown
in Figure 2. The main support posts should be mounted
no less than 1” from the side of the spa. If the villa is
touching the spa, and any damage is incurred due to
contact, the warranty on the spa siding is void.
The total distance between each main support post
will be determined by the size of the spa and villa that
was purchased. The list below will tell you what each
distance should be for each model:
If the spa is: The distance between each villa
main support post is:
7’ x 7’ ± 7’ - 2” x 7’ - 2”
7.5’ x 7.5’ ± 7’ - 8” x 7’ - 8”
8’ x 8’ ± 8’ - 2” x 8’ - 2”
Figure 2. Placement of the support posts
Method A