Cal Flame A726B Hot Tub User Manual


 
LTR20091024, Rev. A
6
Getting the Spa Into Your Yard
Check the Dimensions of Your New Spa
The specication chart on page 26 lists your spa’s model and its dimen-
sion as it sits on the delivery cart. During delivery, the spa must remain
on the delivery cart at all times. Compare the dimensions to the width of
the gates, sidewalks, and doorways along the delivery route. It may be
necessary for you to remove a gate or partially remove a fence in order to
provide an unobstructed passageway to the installation location.
Plan the Delivery Route
Consider the following when planning your delivery route:
Check the width of gates, doors and sidewalks to make sure your spa
will pass through unobstructed. You may have to remove a gate or
part of a fence to allow for adequate width clearance.
Are there low roof eaves, overhanging branches or rain gutters that
could be an obstruction to overhead clearance?
8’ spas need at least 42” wide gate and 9’ height clearance.
If the delivery route will require a 90º turn, check the measurements
at the turn to ensure the spa will t.
Are there protruding gas meters, water meters or A/C units on your
home which will cause obstructions along the delivery path to your
yard?
Are there stairs in your delivery route? If so, you must consult your Cal
Spas dealer prior to delivery to make adequate preparations.
Special Circumstances
The use of a crane for delivery and installation may become necessary if
you are unable to provide an adequate delivery route. It is used primarily
to avoid injury to your spa, your property or to delivery personnel. Your
Cal Spas dealer may be able to assist you with the arrangements. If your
spa delivery requires the use of a crane, the cost of a crane is generally
not included in the standard delivery service.