Bushnell 78.9565 Telescope User Manual


 
TROUBLESHOOTING GUIDE
If after you have set-up your new telescope you are unable to see any objects, use this Quick
Reference guide to help you to understand the cause of the problem and quickly determine a remedy
1. I’ve completed the set-up yet I cannot see anything Check to see if objective lens cover has been
removed.
Try to view an object that is 200 or more yards
away.
If there is more than one eyepiece included with
the telescope, use the lowest power (highest
number) eyepiece to begin viewing.
Use the Rack & Pinion Focusing Mechanism (3) to
bring the object you are trying to view into focus
Intended Configuration Diagram