6
TRIPOD/ACCESSORY MOUNTING
Your Equinox can be mounted on any tripod with a standard ¼” socket. A built-in accessory mounting rail
(11) enables the user to attach a laser (for aiming purposes) or other compatible accessories (not included).
TROUBLESHOOTING
Scope will not turn on.
Check that the batteries are installed properly. Replace the batteries with new ones. Check the battery contacts to ensure
it is clean and free of corrosion. Check that the power is in the “ON” position.
Image is not focused.
Adjust the focus on the Eyepiece (9). Adjust the Objective Lens (10). If still no improvement, clean the lenses; they may
be foggy or dusty.
Visibility decreases or disappears.
Bright light sources such as headlights may cause visibility to degrade or disappear completely. Turn the Power OFF (3)
and turn the scope away from the light source. The unit will restore itself in 1 or 2 minutes.
Conditions such as fog or extremely dark environments will decrease visibility.
Scope ashes.
The scope may ash when used in a bright environment. It may also ash during the rst few seconds of use in dark
environments.