Filter
Top Products
OPERATION
RMB 1660 11/10 Operation Section 4-25
© 2010 Alamo Group Inc.
OPERATION
12.1 Working on Adverse Slopes
When working high with the reach fully extended, it
is possible for the main arm balance to go ‘Over-
Center’ and take the weight off the lift cylinder. A
restrictor in the gland connection of the lift ram
prevents sudden unpredictable movements should
this occur.
NOTE: Always inspect the work area prior to cutting
to remove hazardous material and note any
immovable objects.
13. Lift Float Kit (Optional)
Fitting Location
The hydraulic float kit should be mounted to the
special bracket in such a position that it does not
foul any other component during the slewing
motion.