Filter
Top Products
SECTION I
INTRODUCTION AND
DESCRIPTION
1-1 Introduction
We are pleased to have you as a return Bush Hog cus-
tomer. Your GC-250 has been designed to give you a
low maintenance, simple, and effective way to collect
the grass clippings or perform spring/fall clean-up with
your Bush Hog Home Series ZT mower. This manual is
provided to give you the necessary instructions to prop-
erly mount and operate the GC-250 on your ZT mower.
Please read this manual thoroughly. Understand what
each control is for and how to use it. Observe all safety
decal precautions on the machine and noted through-
out the manual.
Note: all references made to right, left, front, rear, top
or bottom are as viewed from the normal operator's
position on the ZT mower.
Note: All work must be performed with the engine off
and the parking brake locked.
1-2 Description
The GC-250 Grass Catcher, Figure 1, is designed for
turf maintenance where there is a need to collect the
grass clippings as the ZT mower cuts the turf. It is also
good for picking up leaves and twigs in pre-season and
post-season clean-up.
Grass clippings are drawn from the discharge area of
the cutter deck up to the collection bags mounted over
the rear portion of the ZT frame. Once the bags are full
of clippings, the top of the unit can be pivoted up and
each of the two bags can be removed individually for
emptying.
Figure 1
SECTION II
PREPARATION FOR
INSTALLATION
2-1 Unpacking the Grass Catcher
Carefully remove wrapping from around shipping crate
and open boxes. Remove and sort all parts for easy
identification.
GC-250 GRASS CATCHER KIT
CONTENTS
9