Filter
Top Products
OPERATION
2547 01/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 72” material bucket operated with an average tractor hydraulic system of 10.8 GPM
with engine operating at 1950 RPM and control valve relief setting of 2750 PSI.
Horsepower Range 30-90 HP
System pressure/flow rate 2750 PSI/ 10.8 GPM
Lift Capacity to maximum height at pivot pin 2720 lbs.
Breakout force at pivot pin 6530 lbs.
Rollback force at ground line 2600 lbs.
Total weight with bucket (approx.) 1550 lbs.
Raising time to full height 6.83 seconds
Lower time 4.88 seconds
Attachment dump time (regen.) 4.92 (3.40) seconds
Attachment rollback time 3.65 seconds
Hydraulic system flow 10.8 GPM
System pressure at rated flow 2750 PSI
(A) Maximum Lift Height at Pivot Pin 119”
(B) Clearance with Bucket Dumped 93”
(C) Reach at Maximum Height 33”
(D) Maximum Dump Angle 44°
(E) Reach with Attachment on Ground 69”
(F) Attachment Rollback Angle 23°
(G) Digging Depth 2”
(H) Overall Height in Carry Position 65”
(Manufacturers estimated specifications and design subject to change without notice.)