Filter
Top Products
OPERATION
2297 01/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 48” bucket, external hydraulic system of 7GPM with engine operating at 2500 RPM and relief
setting of 2000 PSI.
Horsepower Range 15-35 HP
System pressure/flow rate 2000 PSI/ 7 GPM
Lift Capacity to maximum height 1350 lbs.
Breakout force at pivot pin 2700 lbs.
Rollback force at ground line 1775 lbs.
Total weight with bucket (approx.) 773 lbs.
Raising time to full height 4.7 seconds
Lower time 3.1 seconds
Attachment dump time 2.7 seconds
Attachment rollback time 2.5 seconds
Hydraulic system flow 7 GPM
System pressure at rated flow 2000 PSI
(A) Maximum Lift Height at Pivot Pin 98”
(B) Maximum Height Under Bucket 91”
(C) Clearance with Bucket Dumped 76”
(D) Reach at Maximum Height 25”
(E) Maximum Dump Angle 46°
(F) Reach with Attachment on Ground 62”
(G) Attachment Rollback Angle 17°
(H) Digging Depth 4”
(I) Overall Height in Carry Position 51” @ top of upright
(Manufacturers estimated specifications and design subject to change without notice.)