![](http://pdfasset.owneriq.net/b/c3/bc3255cf-49b1-4cf1-96f6-d7527263c228/bc3255cf-49b1-4cf1-96f6-d7527263c228-bg45.png)
OPERATION
1035 01/11 Operation Section 4-29
© 2011 Alamo Group Inc.
OPERATION
It is important to keep the bucket level when
approaching a bank or pile. This will help prevent
gouging the work area.
PEELING AND SCRAPING
Use a slight bucket angle, travel forward and hold
lift control forward to start the cut. Make a short 5 to
8 foot angle cut and break out cleanly.
With bucket level, start a cut at notch approximately
2 inches deep. Hold depth by feathering bucket
control to adjust cutting lip up or down. When front
tires enter the notch, adjust lift cylinder to maintain
proper depth.