Filter
Top Products
65 Series Rotary Tiller
5
MAINTENANCE SAFETY
1. Follow ALL the operating, maintenance and safety information in the manual.
2. Support the machine with blocks or safety stands when working beneath it.
3. Follow good shop practices
- Keep service area clean and dry.
- Be sure electrical outlets and tools are properly grounded.
- Use adequate light for the job at hand.
4. Use only tools, jacks and hoists of sufficient capacity for the job.
5. Never work on rotor blades or under the machine unless the tractor engine is off
and driveline is disconnected.
6. Make sure all guards are in place and properly secured when maintenance work
is completed.
7. Never wear ill-fitting, baggy or frayed clothing when working around or on any of
the drive system components.
8. Keep hands, feet, hair and clothing away from moving or rotating parts.
9. Clear the area of bystanders, especially small children, when carrying out any
maintenance and repairs or making any adjustments.
TRANSPORT SAFETY
1. Review Transport Safety instructions in tractor manual before moving.
2. Always travel at a safe speed.
3. Always use hazard warning flashers on tractor when transporting unless
prohibited by law.
4. Do not exceed 20 mph (32 kph) during transport.
STORAGE SAFETY
1. Store the unit in an area away from human activity.
2. Do not permit children to play on or around the stored machine.
3. Support frame on stands and blocks to provide a secure base.
SAFETY SIGNS
1. Keep Safety Signs clean and legible at all times.
2. Replace Safety Signs that are missing or have become illegible.
3. Replaced parts that displayed a safety sign should also display the current sign.
4. Safety Signs are available from your Dealer Parts Department or the factory.