Filter
Top Products
Heavy Duty Finishing Mower
23
CHECKING BOLT TORQUE
The tables shown below give correct torque values for various bolts and hex bolts.
Tighten all bolts to the torques specified in chart unless otherwise noted. Check
tightness of bolts periodically, using bolt torque chart as a guide. Replace hardware
with the same strength bolt.
NOTE: See page 16 for correct spindle torque. Do not use this chart for spindle
bolt only.
Torque figures indicated above are valid for non-greased or non-oiled threads and
heads unless otherwise specified. Therefore, do not grease or oil bolts or hex bolts
unless otherwise specified in this manual. When using locking elements, increase
torque values by 5%.
* Torque value for bolts and hex bolts are identified by their head markings.