Filter
Top Products
45 Series Rotary Tiller
- 19 -
SERVICE AND MAINTENANCE
SERVICE
Follow Maintenance Safety Instructions as outlined.
FLUIDS AND LUBRICANTS
1. Hydraulic Oil:
Use a standard hydraulic oil for all operating conditions.
2. Gear Box Oil:
Use an SAE 85W90 gear oil for all operating conditions.
Gear Box Capacity: 1 U.S. quart (0.85 liter)
3. Chain Case Grease:
Use a multi purpose grease for all operating conditions.
If chain case is removed, refill with 800 grams of grease.
4. Storing Lubricants:
Your machine can operate at top efficiency only if clean lubricants are used. Use
clean containers to handle all lubricants. Store them in an area protected from
dust, moisture and other contaminants.
GREASING
Use a Maintenance Checklist to keep a record of all scheduled maintenance.
1. Use a hand-held grease gun for all greasing.
2. Wipe grease fitting with a clean cloth before greasing, to avoid injecting dirt and
grit.
3. Replace and repair broken fittings immediately.
4. If fittings will not take grease, remove and clean thoroughly. Also clean lubricant
passageway. Replace fitting if necessary.