Filter
Top Products
11
Normal Removal
& Installation
Normal Removal & Installation of
Lower Discharge Chute
Note: See previous pages for more detailed
installation and operation instructions if necessary.
1. Lift discharge deflector up (E, Figure 13).
2. Slide the notch of bracket (G) on to deflector hinge
rod (F).
3. Secure the front of lower chute (A) to carriage bolt
(D) using wing nut (B) and locknut (C).
Note: Locknut (C) is intended to keep wing nut (B)
permanently on carriage bolt (D).
A
F
B
Figure 13. Install Lower Discharge Chute
A. Lower Chute
B. Wing Nut
C. Locknut
D. Carriage Bolt
E. Discharge Deflector
F. Deflector Hinge Rod
G. Bracket
D
C
E
G