Filter
Top Products
Due to our policy of constant product improvement, Bowens International reserves the right to change equipment
specifications without notice.
Specifications
www.bowens.co.uk www.bowens.co.uk
Table of Contents
112
Description Page
Introduction and Safety Notes 3
Control Panel Guide 4 – 5
Flash and Modelling Function Overview 6 – 7
Triggering System 7
Getting Started 8
Warnings and Troubleshooting 9
Specifications 11
2
2 (1 per channel)
Manual Selection - Channel A = Symmetric
2 f-stops in one-stop increments
3 f-stops in
1
/3-stop increments on each channel
One LED numeric display per channel
±1% at maximum power
230V AC, 50/60Hz / 90 - 130V AC, 50/60Hz
Green Ready Indicator lights up at 100% charge.
Audio Ready Signal and Modelling Intermittent when selected.
15A thermal breakers for charge and modelling
6V
Switchable: On/Off
Switchable: On/Off
650w (max.) x 2
Off, Proportional, 100% or Automatic 100%
in either Continuous or Intermittent flash-indication mode.
QUADX Flash Head (BW7660)
281 x 184 x 336mm (362mm inc. handle)
2400w/s Channel A only or split 1200W-s Channel A + 1200W-s Channel B
37 to 2400w/s (6-stops)
Fast: <3 seconds (230V) <4 seconds (117V)
Slow: <5 seconds (230V) <6 seconds (117V)
640 (feet/100 ISO) with UV-coated tube
1/300 sec. at 2400W-s
1/1400 sec. at 600W-s
5600 K with UV-coated tube
9.5kg