Filter
Top Products
8
ASSEMBLY
AUXILIARY HANDLE ASSEMBLY (FIG. C)
• Position handle on upper tube to desired height.
• Ensure locking block (8) is aligned with groove in tube.
• Assemble and tighten bolt (9).
POLE EXTENSION (FIG. D)
• Loosen collar (10).
• Extend poles to desired length.
• Tighten collar.
INSTALLING / REMOVING BATTERY PACK
WARNING: Make certain the lock-off button is engaged to
prevent switch actuation before removing or installing battery.
TO INSTALL BATTERY PACK: Insert battery pack into tool until an
audible click is heard (figure B).
TO REMOVE BATTERY PACK: Depress the battery release button
in the back of the battery pack and pull battery pack out of tool
(figure B).
B
9
8
10
C
D