Black & Decker CHH2220 Trimmer User Manual


 
4
6
7
d) Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
HEDGE TRIMMER SAFETY WARNINGS
• Use both hands when operating the hedge trimmer. Using one
hand could cause loss of control and result in serious personal injury.
• Keep all parts of the body away from the cutter blade. Do not
remove cut material or hold material to be cut when blades
are moving. Make sure the switch is off when clearing jammed
material. A moment of inattention while operating the hedge trimmer
may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade
stopped. When transporting or storing the hedge trimmer
always fit the cutting device cover. Proper handling of the hedge
trimmer will reduce possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring or its own
cord. Cutter blades contacting a ″live″ wire may make exposed
metal parts of the power tool ″live″ and could give the operator an
electric shock.
• Keep cable away from cutting area. During operation the cable
may be hidden in shrubs and can be accidentally cut by the blade.
WARNING: Some dust created by this product
contains chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm. Some examples of these
chemicals are:
•compoundsinfertilizers
•compoundsininsecticides,herbicidesandpesticides
•arsenicandchromiumfromchemicallytreatedlumber
COMPONENTS
To reduce your exposure to these chemicals, wear approved safety
equipment such as dust masks that are specially designed to filter
out microscopic particles.
The label on your tool may include the following symbols.
V ...............volts A ....................amperes
Hz .............hertz W ...................watts
min ............minutes ..................alternating current
.......... direct current
n
o ................... no load speed
..............
Class II Construction
....................earthing terminal
............. safety alert symbol .../min .............strokes
per minute
1
4
5
2
8
9
3
1. Trigger Switch
2. Lock Button
3. Switch Handle
4. Blade Guard
5. Bail Handle
6. Charger
7. Battery
8. Blade
9. Blade Sheath