Billy Goat FM3300 Lawn Mower User Manual


 
Part No. 520141 Form No. F061604A
Use only a quali ed mechanic for any
adjustments, disassembly or any kind
of repair .
WARNING: TO AVOID PERSONAL INJURY,
ALWAYS TURN MACHINE OFF, MAKE SURE
ALL MOVING PARTS COME TO A COM-
PLETE STOP.
17
MAINTENANCE
RECONNECT SPARK PLUG WIRE,
AND ALL GUARDS BEFORE STARTING
ENGINE.
DISCONNECT SPARK PLUG WIRE
BEFORE SERVICING UNIT.
Note: Blade, blade brake puck, transaxle brake, and drive belts are normal wear items. These should be
inspected on a regular basis and replaced if worn.
Engine (See Engine Manual)
Check for excessive vibration
Inspect for loose parts
Maintenance Operation
Follow these hourly maintenance
intervals.
Maintenance Schedule
Inspect for worn/damaged parts
Every
Use
Every 50
hrs
Every 5 hrs
or (Daily)
Every 25
hrs
Sharpen Blade
Inspect belts for wear
Replace blade and traction belts
MAINTENANCE HISTORY
Service Performed
Date of Service
Every
200-250 hrs
Lubricate caster pivots and
height adjustment spacers
Lubricate pivot points of all
three control levers
Page 10 of 20
ADJUST ALL BELT TENSIONS AFTER FIRST 5 HRS. OF USE TO PROLONG THE LIFE OF BELTS.
Check brake puck
Check parking brake
Check tire pressure
NOTE: in ate to mfr.s speci ca-
tion as shown on tire side-wall