Part No 350245 Form No F062206A
6
CR Owner’s Manual
SOUND
SOUND LEVEL 81 dB(a) at Operator Position
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 2-9-2002 under the
conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on
the unit for the sound power level for your model.
VIBRATION DATA
VIBRATION LEVEL 1.01g (9.94m/s
2
)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal di rections using
calibrated vibration test equipment. Tests were performed on 5-25-2006 under the conditions listed below.
INTENDED USE
INTENDED USE: This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to
assist in overseeding operations. The machine should not be used for any other purpose than that stated above.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check
for damaged or worn r eel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble
shooting section on page 12).
General Conditions: Sunny
Temperature: 43
o
F(6.1
o
C)
Wind Speed: 10 mph (16.1 kmh)
Wind Direction: North West
Humidity: 82.2%
Barometric Pressure: 29.72Hg (754 mm Hg
)
General Conditions: Sunny
Temperature: 72.32
o
F(22.4
o
C)
Wind Speed: 3.8 mph (6.12kph)
Wind Direction: East
Humidit y: 62.2%
Barometric Pressure: 29.9Hg (101.3kpa
)