Filter
Top Products
Part No 510267 Form No F031607A
6
HW Owner’s Manual
SOUND
SOUND LEVEL 80 dB(a) at Operator Position
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 2-21-2002 under the
conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on
the unit for the sound power level for your model.
VIBRATION DATA
VIBRATION LEVEL 2.57g (25.20m/s
2
)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using
calibrated vibration test equipment. Tests were performed on 5-26-2006 under the conditions listed below.
INTENDED USE
INTENDED USE: This unit is mainly designed for cutting grass. Some overgrown weeds, and taller grass may also
be cut. Be sure to inspect work area and machine before operating. Make sure that all operators of this equipment
are trained in general machine use and safety.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check
for damaged or worn blade, loose blade jam nut, loose engine or lodged foreign objects. Note: See maintenance
section for proper blade jam nut torque specifications.
General Conditions: Sunny
Temperature: 49
o
F (9.4
o
C)
Wind Speed: 8 mph (12.8 kmh)
Wind Direction: South East
Humidity: 53%
Barometric Pressure: 30.15Hg (102.1kpa)
General Conditions: Sunny
Temperature: 87.44
o
F (30.8
o
C)
Wind Speed: 3.1 mph (5.04kph)
Wind Direction: South East
Humidity: 41.5%
Barometric Pressure: 29.89Hg (101.25kpa
)