Billy Goat GZ401H Brush Cutter User Manual


 
Part No 610428 Form No F022508A
6
GZ Owner’s Manual
INTENDED USE
INTENDED USE: This machine is designed for cleaning and removing vegetation and debris from cracks in asphalt
pavement.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check
for damaged or worn brush, loose hardware, loose engine or lodged foreign objects. (See trouble shooting section
on page 11).
INSTRUCTION LABELS
The labels shown below were installed on your BILLY GOAT
®
Grazer. If any labels are damaged or missing, replace them before operating this
equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The
correct position for each label may be determined by referring to the Figure and Item numbers shown.
LABEL WARNING GUARDS LABEL EXPLOSIVE FUEL DANGER FLYING DEBRIS LABEL READ MANUAL
ITEM #59 P/N 900327 ITEM # 2 P/N 400268 ITEM #66 P/N 810736 ITEM #58 P/N 890301
LABEL EAR EYE BREATHING LABEL EXPLOSIVE FUEL LABEL DANGER
ITEM #57 P/N 890254 ITEM # 63 P/N 610107 ITEM #5 P/N 600117
(Honda only)
ENGINE LABELS
THROTTLE CONTROLS
SUBARU HONDA
Subaru Honda
IMPORTANT ENGINE INFORMATION EM
ENGINE FAMILY - 2FJXS, 1691GA DISPLACEMENT 169CM3
REFER TO OWNER'S MANUAL FOR MAINTENANCE SPECFICATIONS
A
ND ADJUSTMENTS. THIS ENGINE CONFORMS TO U.S. EPA PH1 AND 2002 CALIFORNIA
EMISSION REGULATIONS FOR SMALL
OFF-ROAD ENGINES.
FUJI HEAVY INDUSTRIES LTD.
Choke
Fuel valve
Throttle
Choke
Throttle
Fuel valve