Filter
Top Products
Part No 500360 22 F052609A
BC2403 Series Brush Cutter Owner’s Manual
TRANSAXLE DRIVE CLUTCH ADJUSTMENT
READ all safety instructions before servicing unit.
DISCONNECT spark plug wire before servicing unit.
1. Disconnect spark plug wire.
2. As the belt wears or begins slipping or squealing, adjustment may be required to maintain proper cable
tension and clutch engagement. A properly adjusted transaxle drive clutch should require 3 lbs of force to
depress the end of the clutch lever.
3. Adjust cable tension by tightening or loosening cable adjustment barrel on rear of engine base (see below).
Moving the cable adjustment barrel IN decreases clutch tension. Moving the barrel OUT
increases tension.
Transaxle Cable Adjustment
4. Reconnect spark plug wire.
DECREASE
INCREASE