Bench PRC 9.6 Brush Cutter User Manual


 
7 GB/IE/CY
Q
Delivery scope
1 cordless branch cutter
1 battery charger with cable and plug
1 operating instruction manual
1 “Warranty and Service” booklet
Q
Technical data
Cordless branch cutter PRC 9.6 - KH 3127:
Rated voltage: 9,6 V
Rated speed: 860 rpm
Sound pressure level: 72,4 dB (A)
Sound power level: 83,4 dB (A)
Integrated NI-CD rechargeable battery:
Rated capacity: 1.7 Ah
Rated voltage: 9,6 V
Charging time: approx. 3 h
Charger PRC 9.6 - 01:
Primary
Rated voltage: 230 V
~
50 Hz
Rated power consumption: 11 W
Secondary
Rated voltage: 12 V
Rated power consumption: 450 mA
Protection class: II /
General safety advice
J Attention! Please read all the instructions
and advice. Failure to observe the instructions
and advice given below may result in electric
shock, fire and / or serious injury.
MAKE SURE THAT YOU KEEP THESE INSTRUC-
TIONS AND SAFETY ADVICE IN A SAFE PLACE.
1. Your working area
a) Keep your working area clean and
clutter-free. Untidy or poorly lit working
areas can lead to accidents.
b)
Do not work with the device
in potentially explosive envi-
ronments in which there are
inflammable liquids, gases or dusts.
Electrical power tools create sparks, which can
ignite dusts or fumes.
c)
Keep children and other
people away while you are
operating the electrical tool.
Distractions can cause you to lose control of
the device.
2. Electrical safety
a) The mains plug on the device must
match the mains socket. The plug
must not be modified in any way. Do
not use an adapter plug with devices
fitted with a protective earth. Unmodi-
fied plugs and matching sockets reduce the risk
of electric shock.
b) Avoid touching earthed surfaces such
as pipes, radiators, ovens and refrig-
erators with any part of your body.
There is an increased risk of electric shock if
your body is earthed.
c)
Keep the device away from
rain or moisture. Water entering
an electrical device increases the risk
Introduction / General safety advice