Filter
Top Products
1. About the cooling circuit and cooling liquid
- Immerse the inlet tube end without fitting as far as possible into the bottle with fresh cooling liquid (1).
- Open the fitting by pressing-in valve mechanism (2) to allow filling the immersed tubing with liquid.
- Release valve to trap the liquid in the tube.
- Drop the fitting below the liquid level (3).
- Redo valve opening in fitting by pressing-in valve mechanism and allow the liquid to fill the tube (4).
- Release valve mechanism once all air is expelled.
- Remove the inlet tube out of bottle.
The liquid cooling loop - Filling the Inlet tubing
Valved Straight-Through
Fitting
1
2
3
4
Image 1-4
Filling the inlet tubing
6. Proceed with liquid cooling replacement or liquid cooling refilling.
R59770032 COOLING LIQUID REFILL 24/08/2006
3