Filter
Top Products
VS0102 / VS0104 / VS0108 User Manual
12
Switch Port Commands
The formula for Switch Port commands are as follows:
1. Switch Command + Output Command + Port Number + Control [Enter]
For example, to turn on output port 02, type the following:
sw o02 on [Enter]
or
For example, to turn off output port 01, input the following:
sw o01 off [Enter]
The following tables show the possible values and formats for the Output
Command, Port Number and Control:
Note: 1. Each command string can be separated with a space.
2. If the Port Number string is skipped, the default value is used.
The following table shows the available switch port command list:
Command Description
sw Switch command
Output Command Description
o Output command
Port number Description
yy 01-08 port (default is 01)
* All output ports
Control Description
on Turn on
off Turn off
Command Output Port Control Enter Description
sw o yy on [Enter] Turn on display
oyy
off [Enter] Turn off display
o*
on [Enter] Turn on all displays
o*
off [Enter] Turn off all displays