ATEN Technology VS0102 Log Splitter User Manual


 
Chapter 2. Hardware Setup
7
2. Screw the bracket into any convenient location on the rack.
Note: These screws are not provided. We recommend that you use M5 x 12
Phillips Type I cross, recessed type screws.
Grounding
To prevent damage to your installation it is important that all devices are
properly grounded.
1. Use a grounding wire to ground the VS0102 / VS0104 / VS0108 by
connecting one end of the wire to the grounding terminal, and the other
end of the wire to a suitable grounded object.
2. Make sure that the computer(s)/device(s) that the VS0102 / VS0104 /
VS0108 connects to are properly grounded.