Filter
Top Products
19
The friction and radiant heat from the pump motor can cause
an extremely high ambient temperature around the spa and
the equipment causing an overheat condition. If this condi-
tion is suspect, try running the spa with the equipment door
off to see if it still overheats.
Gr
Gr
ound Fault Interr
ound Fault Interr
upter T
upter T
rips
rips
- Check if it does it only when heat turns on, if so check
element by removing the power to the element termi-
nal and turn the heat on. If it only faults when the ele-
ment is connected with power, the element has a
ground fault and must be replaced.
- This can be done with the pump, ozonator, or any
other peripheral equipment as a process of elimination
to see where the fault may be.
- Be sure that the neutral on the GFCI has been wired
properly in the main panel.
Impr
Impr
oper T
oper T
emperatur
emperatur
e Measur
e Measur
ement
ement
- Remove temperature sensor from it’s current location
and submerge directly into the spa/hot tub water.
Compare it to another accurate digital thermometer.
This will tell you if it is the sensor or the application.
(See temperature sensor in the description and use of
controls section of this manual).
Pr
Pr
essur
essur
e Switch
e Switch
- The pressure switch is not adjustable.
CHEMIC
CHEMIC
AL MAINTEN
AL MAINTEN
ANCE
ANCE
Your spa comes with a cartridge filter system. Filtering of
the water helps to maintain water cleanliness and clarity.
While the filter traps most solid materials, it is still necessary
to add a sanitizer such as bromine or chlorine to the water to
control bacteria, algae and to oxidize any organic materials
in the water. This section will explain how to use bromine to
maintain clean, clear and odor-free water. Chlorine is also
available through your local Pool and/or Spa retail outlet.
When purchasing from your local retailer, it is recommended
that you bring a sample of your water for analysis and guid-
ance on which chemicals you may require.
Chemicals and test strips can be purchased directly from
Aruba Spas by calling us at 1-800-609-2227.