Filter
Top Products
1 Slide rear siding into channel of
corner and splice posts fastening to
rear frame as shown in previous
step 9.
2 Install rear siding to complete
each section of rear wall. Fasten top
center of last siding to rear angle.
3 Slide front siding into channels of
corner post and door jamb. This
siding is fastened from the inside,
using screws into post and jamb.
4 Install front siding to complete
both front sections.
●●
●●
● 8736 Rear Siding (6)
●●
●●
● 8737 Front Siding (6)
● Parts Needed For ●
Rear/Front Siding
Step 10
Y23
23
STEP
2
STEP
3
8737
STEP
1
STEP
4
8737
FRONT
8736
8736
Fasten Top Center of
Last Siding to Stud
8737
8736
Front Panels Fasten
at Corners & Door
Jambs from the Inside
Fasten Rear Siding
to Corner & Splice
Posts From Inside
FRONT