Filter
Top Products
1 - 7
WARNING!
2. DANGER!
DANGER!
2.6 PREPARATION
Proper preparation is very important for efficient work
before you start to remove any parts. A clean work
area at the beginning of each job will allow you to
perform service repairs easily and quickly.
To reduce the incidence of misplaced tools or parts,
place removed components with all attaching hardware
in the disassembly order on a clean work surface.
Organization is a key part of proper reassembly.
Tools, instruments, and parts needed for the job should
be gathered before work is started. Interrupting a job to
locate tools or parts is a needless delay.
2.7 SERVICE POSITION
To ensure the unit is positioned in the proper service
position place unit on a flat level surface. ALWAYS stop
engine. Assure unit is secure and will not tip over. Strap
and clamp onto lift if used.
See Service Position in General Maintenance for
specific instructions.
Read Owner/Operator Manual.
Keep people away from unit while
operating. Keep children out of work
area and under watchful care of a
responsible adult.
Never direct discharge towards persons
or property that may be injured or
damaged by thrown objects.
Stop engine, remove key, read manual
before making any repairs or
adjustments.
Wear appropriate hearing protection.
ONLY use clean-out tool to clear
blockages. NEVER use your hands.
ROTATING PARTS! ONLY use clean-out
tool to clear blockages. NEVER use your
hands. High speed impeller rotates
below discharge opening. Wait for all
moving parts to stop before removing
clogs or servicing.
OL1801
OL4370
OL0910
OL4010
OL4690
OL6610
OS6610
ROTATING PARTS.
Keep clear of auger while engine is
running.
• Read Operator’s Manual.
• Allow operation only by properly
trained adult, never children.
• Stop engine and remove ignition key
prior to leaving the operator’s
position for any reason.
• Keep all controls, guards and safety
devices properly serviced and
functional.
• Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
WARNING: ALWAYS block wheels and know
that jack stands or blocks used are stable,
strong, secure and will hold the weight of the
unit during maintenance.
OS2080