Filter
Top Products
9 - 28
9.3 DISCHARGE CHUTE
Models 939001 and 939002.
Figure 25
1. Remove bolts holding chute pedestal to blower
housing.
2. Lift chute and pedestal from housing.
3. Check parts for wear, and replace as needed.
4. Assemble in reverse order.
WARNING: DO NOT put hands or feet near
or under rotating parts. Keep clear of
discharge opening at all times.
WARNING: NEVER direct discharge of
material toward bystanders nor allow anyone
in front of equipment while unit is in operation.
Be familiar with area of operation.
1
1
2
3
4
5
6
7
8
9
10
11
6
12
12
13
14
15
1.Discharge Chute
2. Handle
3. Bolt
4. Nut and Washers
5. Blower Housing
6. Bolt with Washer
7. Pedestal
8. Locking Nut
9. Flat Washer
10.Spring
11. Friction Plate
12.Friction Washer
13.Flat Washer
14.Bolt
15.Direction Handle
Figure 25
Ps0373-1