Filter
Top Products
GB - 26
Engine
runs
rough.
1. Choke engaged. 1. Disengage choke.
2. Air filter
cartridge
plugged.
2. Clean or replace air filter cartridge. Refer
to Engine Manual for detailed instructions.
3. Faulty engine. 3. Contact your Ariens Dealer.
Unit does not
move with
engine
running when
using steering
levers.
1. The
transmission
bypass lever is
engaged.
1. Disengage transmission bypass lever
(see MOVING UNIT MANUALLY on
page 14).
2. Faulty
hydrostatic belt.
2. Replace hydrostatic belt (see
REPLACING HYDROSTATIC BELT on
page 24).
3. Faulty
transmission.
3. Contact your Ariens Dealer.
PTO or mower
blades do not
engage or
shuts off.
1. Operator
presence switch
not depressed.
1. Depress operator presence switch by
sitting on seat.
2. Faulty operator
presence
switch.
2. Contact your Ariens Dealer.
3. Electric clutch
connector is
loose or
disconnected.
3. Connect the electric clutch connector.
See REPLACING HYDROSTATIC BELT
on page 24 for the electric clutch
connector location.
4. Faulty PTO belt. 4. Replace PTO belt (see REPLACING PTO
BELT on page 23).
5. Faulty PTO
switch, wires,
connectors, or
clutch.
5. Contact your Ariens Dealer.
Engine
overheats.
1. Engine oil level
low.
1. Add engine oil. Refer to Engine Manual
for detailed instructions.
2. Cooling system
plugged.
2. Clean cooling system. Refer to Engine
Manual for detailed instructions.
3. Faulty engine. 3. Contact your Ariens Dealer.
Unit moves
with engine off
and parking
brake
engaged.
1. The parking
brake needs
adjustment.
1. Contact your Ariens Dealer.
2. Faulty parking
brake.
2. Contact your Ariens Dealer.
PROBLEM PROBABLE
CAUSE
CORRECTION