Filter
Top Products
8
Fuse Replacing
Disconnect AC power before replacing fuse. Only replace fuse with same type
and rating.
Step 1: Disconnect power cord from supply.
Step 2: Use a flat-head screwdriver to release fuse holder.
Step 3: Replace fuse with exact same type and rating as indicated below.
Step 4: Reinsert fuse holder.
Fuse
100V = T6.3A 250V
110 – 120V = T7A 250V
220 – 240V = T4A 250V
Status Messages
Status LED
Indication
Flashing Green
Machine is heating up
Flashing Green (3 seconds)
Self Cleaning
Solid Green
Machine ready for operation
Flashing Amber
Producing haze
Solid Amber
DMX signal received
Solid Red
Heater is overheating, machine can
not be operated
Flashing Red
Liquid detected backflow to air pump
Flashing Red/Green
Machine cannot heat up