Filter
Top Products
6
Rotary Knob
Function
SMOKE
Turn haze on/off, adjust output volume from 0~100%
FAN
Adjust fan speed from 20%~100%
Remote Control Operation (Optional)
To operate the machine by remote control, connect the remote to the microphone jack
located on the rear of machine. Use the switch to turn haze on/off, and use the rotary knob to
adjust the output volume from 0~100%.
DMX Operation
Making the DMX Connection – Connect machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses an 3-pin XLR connector for DMX connection,
the connector is located on the rear of the machine.
Address Setup – Use the DIP switch located on the rear of the machine to set the DMX
address. The machine occupies 2 control channels. The starting address is defined as the
first channel from which the machine will respond to the controller. Always double check to
make sure there are no overlapping channles in order to control the machine correctly.