Filter
Top Products
4
The fluid tank is designed to fit only one way around. Make sure you insert it
correctly, as shown above, with the lower edge facing into the machine.
OPERATION
Turn on the power switch located on the back of the bubble machine. You will
notice that the internal bubble drum and fan are activated. Bubbles are now
produced.
B-100X
B-100X contains a control board allowing the bubble machine to use the wireless
and timer remote controls. The B-100, without this board, cannot use these
remote controls. The two versions are identical in all other respects.
Remotes
Z-10 (on / off)
BCT-1 (Timer for B-100X)
BCR-1 (Wireless for B-100X)
Save these instructions
C08B100