Antari Lighting and Effects B-100(X) Insect Control Equipment User Manual


 
2
Antari Bubble Machine
Thank you for choosing the Antari Bubble Machine. You now own a rugged
and powerful state-of-the-art machine. Prior to use, we suggest that you
carefully read all of the instructions. By following the suggestions found in this
user manual, you can look forward to exceptional performance from your Antari
Bubble Machine for years to come.
Please follow these operation, safety and maintenance instructions to
ensure a long and safe life for your Antari Bubble Machine.
Specifications
Power: AC 120V/60Hz (120V Model)
AC 230V/50Hz (230V Model)
Fuse: F2A/250V (120V Model)
T1A/250V (230V Model)
Dimensions (mm): 236.6 x 189.2 x 150
Weight: Net – 3.4 kg, Gross – 4.5 kg
CAUTIONS
Pay attention to all warning labels and instructions printed on the exterior
of your Antari Bubble Machine
Do not overfill your bubble machine. Overfilling will cause the unit to leak.
Danger of electric shock
Keep this device dry.
Keep the bubble machine upright.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to
use take care to determine that the unit is installed at the rated voltage.
Turn off or unplug when not in use.
The power plug needs to be clearly seen by user when installed on the wall.
This machine is not water-proof or splash-proof. If moisture, water, or any
liquid gets inside the housing, immediately unplug the unit and contact a
service technician or your dealer before using it again.
No user serviceable parts inside. Refer to your Antari dealer or other
qualified service personnel.
For indoor use only. Not designed for outdoor use.
This appliance must be earthed.
For adult use only. The bubble machine must be installed out of the reach
of children. Never leave the unit running unattended.
Never aim the output at open flames.
Extended use will make all surfaces slippery.
Position output of bubbles away from persons.
Switch off from mains when refilling the liquid or cleaning the system.
Regular cleaning of the bubble wheel is required.
Do not transport with liquid. If the machine get wet, do not use until it is
completely dry.
Antari bubble liquid may leave permanent marks on clothing.