Filter
Top Products
11
Operating instructions
3.6 End of operation
Danger of scalding!
Never detach the high pressure hose
when the water temperature is above
120°F.
Turn the control knob (16) to position “cold water” (in the blue sector) and squeeze the trigger until the
temperature is below 120°F. The cooling period from 176°F to 120°F is approx. 2 min.
Then, turn off the water supply and stop the machine by turning the control knob (16) to position - O -.
Now the high pressure hose can be detached.
3.7 Transportation
If lifting with a crane, use lifting straps!
Lifting manually:
When lifting the machine manually, lift at the lifting points marked on the fenders in front of the wheels,
and on the side at the back of the machine.
Lifting by crane:
When lifting the machine by crane, lifting straps should be used.
Cross the straps diagonally under the machine. Never lift the machine by the handle (17).
Transport on a vehicle:
Always transport the machine in upright position. Apply the caster wheel brake (19) and secure the ma-
chine with straps or rope during transport.