Nilfisk-ALTO 106269015 Pressure Washer User Manual


 
6
NEPTUNE PE
added (available from the fuel
oil trade).
Filling up the engine with fuel,
see the enclosed instructions for
the engine.
3.4 Connecting the high
pressure hose
1. Connect the high pressure
hose quick connector to the
high pressure nipple.
3.5 Connecting the water
supply
1. Attach hose coupling found
with Owners Manual to the
water supply hose.
2. Rinse the water supply hose
briefl y in order to prevent
sand an other dirt particles
entering into the machine.
3. Attach hose coupling to inlet.
4. Open water supply faucet.
NOTE!
See chapter 9.4 Technical Data
for required quantity of water
and water pressure.
In the case of poor water quality
(sand, etc.), it is recommended
that an inlet water filter be in-
stalled.
Water supply hose should be
a reinforced hose and have a
minimum inside diameter of
3/4" (19 mm).