Alamo ST10 Lawn Mower User Manual


 
53
ST15 (Archive Book) 01/04
© 2004 Alamo Group Inc.
Item Part No. Qty. Description
1 02978633 1 Hose Asy.
2 02978636 1 Cylinder Asy. Large Bore
3 02978637 1 Hose Assembly
4 02978638 6 Hose Clamp, Metal
7 02978616 5 Elbow
8 02978639 1 Cylinder Asy. Medium Bore
9 02978640 1 Hose Asy.
10 02978641 1 Cylinder Asy. Small Bore
11 02978642 1 Hose Asy.
13 00755153 6 Cotter Pin
14 02978527 6 Clevis Pin
17 02957042 1 Bolt
18 15B600 3 Flat Washer
19 00015800 3 Locknut
20 02978643 1 Elbow
21 02978655 3 Stroke Control Asy.
22 02978618 1 Restrictor
23 262-004 1 Roll Pin
24 C502-193 1 Cylinder Pin (Center)
25 C502-194 1 Cylinder Pin Sleeve
AXLE LIFT CYL.
SCHEMATIC
ST15 / ST10
Jan. 2002
to
Oct. 2003
ST15-C31200557203
to
ST15-C31200789311
NOTE: These are Phasing (Slave) Cylinders and must be connected as shown, Large Bore
Cylinder, Medium Bore Cylinder and then Small Bore Cylinder. The Cylinders will have to be
free of Air, this means cylinders must be bled and remain an air tight system to prevent air
from entering cylinders. See Operators manual for procedures to connect these cylinders.
See drawing below shownig how oil is bypassed through the Cylinder to the next Cylinder
when Cylinders are stroked completly out.
Cylinder Rod
Piston
Rephasing
Groove
Oil Flow
In
Oil Flow
Out