Filter
Top Products
OPERATION
SM72 02/10 Operation Section 4-11
© 2010 Alamo Group Inc.
OPERATION
2. With the mower fully supported by the skid
steer boom, lower the mower to ground level.
Slightly tilt the front of the mower head upward
about 2” from ground level. Turn off the engine,
set the parking brake, and exit the skid steer.
Push both latch handles downward to engage
the hitch pins into the mower hitch retaining
tabs. Never extend any part of your body from
the operator’s area to operate latches or to
connect hydraulic lines or the height limiting
chain. The mower hitch is now securely
attached to the mounting plate of the skid steer.
3. With the skid steer still completely shut down,
secure the height limiting safety chain to the
front of the skid steer chassis. Attach chain so
that lift height is limited to 18 inches.