Filter
Top Products
ASSEMBLY
SM72 02/10 Assembly Section 3-6
© 2010 Alamo Group Inc.
ASSEMBLY
SKID SHOE ASSEMBLY
1. Attach Flat Bar Left and Right Hand Skid Shoes
(1 and 5) to the underside of the mower side
skirts using 3/8” x 1-1/2” Bolts (2), Flatwashers
(3), and Locknuts (4). Insert bolts from the
underside up to ensure that threads do not
become worn and nuts can be removed if skid
shoes are to be replaced at a later time.
2. Secure Front Right and Left Hand Skid Shoes
(6 and 7, optional equipment) to the front of the
mower using bolts (2), locknuts (4), and
lockwashers (3). Front skid shoes have multiple
hole patterns that enable deck height to be
placed at desired mowing height.
3. Tighten all bolts and nuts to the recommended
torque. (Refer to Image Asm-R-0274)
OPTIONAL GAUGE WHEEL
ASSEMBLY
1. Attach weldment. T/W Beam (1) to the mower
with bolt (2) and Toplock nut (3)
2. Then attach tailwheel support RH and LH (4) to
Bolt (5) with Toplock nut 6.
3. After attaching the tailwheel support attach
them to position bracket (7) and attach with bolt
(8) and toplock nut (9).
4. Finally attach the wheel (10) to the Tailwheel
beam with the cotter pin (11) and Washer (12).
5. Tighten all bolts and nuts to the recommended
torque. (Refer to Image Asm-R-0277)
Skid Shoe Assembly
Optional Gauge Wheel Assembly