Filter
Top Products
OPERATION
SL60 03/08 Operation Section 4-13
© 2008 Alamo Group Inc
OPERATION
7. PRE-OPERATION INSPECTION AND SERVICE
Before each use, a pre-operation inspection and service of the implement and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped
and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection
reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing
parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time
and repair cost can be avoided. OPS-U-0029
Always disconnect the auxiliary hydraulic couplers from the Power Unit before performing
service on the Implement. Never work on the Implement with the Power Unit auxiliary
hydraulics connected. Rotating parts such as blades could turn without warning and cause
immediate entanglement, injury or death.
(SPU-31)
Periodically inspect all moving parts for wear and replace when neces-
sary with authorized service parts. Look for loose fasteners, worn or bro-
ken parts, and leaky or loose fittings. Make sure all pins have cotter pins
and washers. Serious injury may occur from not maintaining this
machine in good working order.
(SG-21)