Filter
Top Products
OPERATION
SL60 03/08 Operation Section 4-32
© 2008 Alamo Group Inc.
OPERATION
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
Blade Bolts 1. Bolts not tightened. Tighten bolts to
250 ft.lbs.
2. Bolt hole elongated or Replace Bushing or
oversized. Blade Carrier.
3. Locknut worn out. Replace Locknut.
Blades Wears Too Fast 1. Cutting in sandy conditions. Increase cutting height.
2. Cutting in rocky conditions. Increase cutting height.
Blade Carrier Won’t Turn 1. Pressure applied to wrong side Reverse flow direction.
of motor.
Blade carrier turns wrong 1. Check valve installed on Move check valve to opposite
direction wrong side of motor side of motor