Filter
Top Products
ASSEMBLY
HYDRO 88 & 96 03/09 Assembly Section 3-2
©2009 Alamo Group Inc.
ASSEMBLY
GENERAL
The HYDRO88 & 96 will attach to most tractors with Cat l or Cat ll Hitch and 540 PTO RPM.
DEALER SET-UP INSTRUCTIONS
Assembly of this mower is the responsibility of the Alamo dealer. The mower should be delivered to the owner
completely assembled, lubricated, and adjusted for normal cutting conditions.
Set up mower as received from the factory with these instructions. Open parts box and lay parts out to make
location easy. Refer to the parts lists and exploded view drawings for more detail.
This mower is shipped partially assembled. Assembly will be easier if components are aligned and loosely
assembled before tightening hardware.
Always use personal protection devices such as eye, ear and foot protectors during
assembly.
HOSE ATTACHMENT
Attach the Pressure Hose (1) to the Hydraulic Motor. Attach the Return Hose (2) to the Wet Tube on the
Mower. Attach the Case Drain Hose (3) to the Hydraulic Motor. Figure ASM-FL-0036